Heavy Cut Compound HC400

Heavy Cut Compound HC400

HC 400 is a rubbing compound that cuts and finishes in one single step.  Removes grit 1200 or finer sanding marks, swirl and oxidation on all paints, leaving a high gloss. Low splatter formula, easy to wipe, silicon free.

DIRECTIONS FOR USE

• Shake well before use. Apply enough polish to the paint surface to work a
  2′ x 2′ area. Spread the polishing compound over the surface with wool/foam pad before starting the polisher. Start the polisher and buff using light-to-medium pressure
• Do not apply in direct sunlight or onto a hot surface

STORAGE CONDITIONS

• Keep away from heat & sunlight. Store below 30⁰C

WARNINGS

• Use in a well-ventilated area. If exhaust ventilation is not adequate, use appropriate respiratory protection. Avoid eye contact
• Contains petroleum distillates. If swallowed, do not induce vomiting, consult doctor immediately. Keep out of reach of children